WORKEAR FOR PROTECTION AGAINST ASIAN HORNET (VESPA VELUTINE)

Model 1511

Fluorescent red outer fabric made of 50% polyester and 50% cotton; weight 250 g/m².

Four carabiner rings on the belt.

Certified anti-stinger rubber gloves with Kevlar lining attached to fabric sleeves with elastic bands at the ends.

Reinforced with knee, buttock and elbow pads.

Double-layer soft polyester fabric.
Fluorescent red outer fabric made of 50% polyester and 50% cotton; weight 250 g/m².
Fluffy 100% polyester fabric, weighing approximately 120 g/m².
Inner lining made of 65% polyester and 35% cotton; weight 240 g/m².
Hood with plastic grille offering a 360-degree view and reduced volume.
Padded protection on the back of the neck.
Adjustable homologated helmet with rotating wheel, polycarbonate visor with aluminum reinforcement adapted to the helmet, and ventilation holes.
Zipper with double separator closing the hood.
Adrenaline pocket on the left arm.
Injection-molded front zipper with double runner.
Full zipper cover with Velcro seal.
Two spray holders; one fixed on the back fastened with two elastic bands and another hanging on the belt which facilitates the mobility needed for climbing stairs.
Adjustable belt with quick buckle closure made of nylon.
Four carabiner rings on the belt.
Two lower front pockets with injection-molded zippers.
Sleeve cuffs with elastic bands.
Certified anti-stinger rubber gloves with Kevlar lining attached to fabric sleeves with elastic bands at the ends.
Reinforced with knee, buttock and elbow pads.
Zippers on the bottom of each legging to make putting on shoes easy.
Leggings with elastic bands at the top and bottom, with a third band to strap around the sole of the foot.
We can manufacture any size required.

CERTIFIED BY AITEX Nº 0161/4401/15 EPI TYPE BUZO XORSA 1510 AND ITS VARIANTE 1511.
PATENTED MODEL.
EU CERTIFICATE.

Beige exterior fabric made of 65% polyester and 35% cotton; weight 240 g/m²

Hood with plastic grille offering a 360° view.

Adjustable belt with quick buckle closure made of nylon.

Certified anti-stinger rubber gloves with Kevlar lining attached to fabric sleeves with elastic bands at the ends.

Double-layer soft polyester fabric.
Beige exterior fabric made of 65% polyester and 35% cotton; weight 240 g/m².
Fluffy 100% polyester fabric, weighing approximately 120 g/m².
Inner lining made of 65% polyester and 35% cotton; weight 240 g/m².
Hood with plastic grille offering a 360° view.
Padded protection on the back of the neck.
Adjustable homologated helmet with rotating wheel, polycarbonate visor with aluminum reinforcement adapted to the helmet, and ventilation holes.
Zipper with double separator closing the hood.
Injection-molded front zipper with double runner.
Full zipper cover with Velcro seal.
Back pocket for spray canister.
Leg pocket for spray canister.
Adjustable belt with quick buckle closure made of nylon.
Two lower front pockets with injection-molded zippers.
Sleeve cuffs with elastic bands.
Certified anti-stinger rubber gloves with Kevlar lining attached to fabric sleeves with elastic bands at the ends.
Leggings with elastic bands at the top and bottom, with a third band to strap around the sole of the foot.
We can manufacture any size required.