0

Your cart

0

Your cart

Protective suits against Asian hornet, orientalis hornet and bicolor hornet

Our suits are patented at the European level and certified by AITEX; they are the only ones with the necessary guarantees and certifications to be used by official bodies, which is why a large number of city councils, civil protection groups, and fire departments already use our suits. We serve all of Europe.

VELUTINA SUIT MODEL 1511

CERTIFIED BY AITEX Nº 0161/4401/15
PATENTED MODEL
Traje protección avispa velutina 1511
Size guide
Buy product
From €335.97 (+ taxes)

  • Fluorescent red outer fabric, composed of 50% polyester and 50% cotton and weighing 250 g/ m2 .

  • Four carabiner rings on belt.

  • Adrenaline pocket on the left arm.

  • Fabric with double layer and soft polyester.
  • Fluorescent red outer fabric, composed of 50% polyester and 50% cotton, and weighing 250 g/m2.
  • Soft, 100% polyester composition, with a weight of 200 g/m2.
  • Inner fabric composed of 65% polyester and 35% cotton and a weight of 240 g/m2.
  • Hood with 2x2mm Teflon-coated glass mesh strip, 180-degree vision and reduced volume.
  • Padded protection from the back of the neck to the ears.
  • Approved helmet (EN397) adjustable with rotating wheel and chin strap with polycarbonate visor (EN 166 1B 3) and ventilation holes.
  • Nylon zipper with a slider and separator closing the hood.
  • Adrenaline pocket on the left arm.
  • Metal front zipper with double slider.
  • Full zipper cover with Velcro closure.
  • Two spray holders; one fixed on the back secured with two elastic bands and another hanging from the belt in an aerial manner that facilitates the mobility required when climbing stairs.
  • Adjustable belt with quick-release buckle closure made of nylon.
  • Four carabiner rings on belt.
  • Two lower front pockets with nylon zip closure.
  • Elasticated cuffs on sleeves.
  • Certified (EN388) anti-puncture rubberized gloves with Kevlar interior attached to fabric cuffs with elastic at the end.
  • Reinforced with knee pads, seat pads and elbow pads.
  • Zippers at the bottom of the legs for easy on and off with shoes. And an adjustable Velcro strap.
  • Gaiters with elastic at the top and bottom and with a third elastic band to hold the sole of the foot.
  • We manufacture all the necessary sizes.

Regulations

  • CERTIFIED BY AITEX Nº0161/4401/15 EPI TYPE DIVER’S SUIT XORSA 1510 AND ITS VARIANT 1511.
  • PATENTED MODEL.
  • EU CERTIFICATE.

VELUTINA SUIT MODEL 1510

CERTIFIED BY AITEX Nº 0161/4401/15 PATENTED MODEL
Size guide
Comprar producto
From €310.14 (+ taxes)
  • Beige outer fabric composed of 65% polyester and 35% cotton and weighing 240 g/ m2 .
  • Cinturón ajustable con cierre de hebilla rápida fabricada en nylon.
  • Certified rubberized anti-puncture gloves with Kevlar interior attached to fabric cuffs with elastic at the end.
  • Fabric with double layer and soft polyester.
  • Beige outer fabric, composed of 65% polyester and 35% cotton, and weighing 240 g/m2.
  • Soft, 100% polyester composition, with a weight of 200 g/m2.
  • Inner fabric composed of 65% polyester and 35% cotton and a weight of 240 g/m2.
  • Hood with 2x2mm Teflon-coated glass mesh strip, 180-degree vision and reduced volume.
  • Padded protection from the back of the neck to the ears.
  • Approved helmet (EN397) adjustable with rotating wheel and chin strap with polycarbonate visor (EN 1661B 3) and ventilation holes.
  • Nylon zipper with a slider and separator closing the hood.
  • Metal front zipper with double slider.
  • Full zipper cover with Velcro closure.
  • A spray holder on the back secured with two elastic bands and another on the leg also secured with two elastic bands.
  • Adjustable belt with quick-release buckle closure made of nylon.
  • Two lower front pockets with nylon zip closure.
  • Elasticated cuffs on sleeves.
  • Certified (EN388) anti-puncture rubberized gloves with Kevlar interior attached to fabric cuffs with elastic at the end.
  • Gaiters with elastic at the top and bottom and with a third elastic band to hold the sole of the foot.
  • We manufacture all the necessary sizes.

Regulations

  • CERTIFIED BY AITEX Nº 0161/4401/15 EPI TYPE DIVER’S SUIT XORSA 1510 AND ITS VARIANT 1511.
  • PATENTED MODEL.
  • CERTIFICADO UE.

traje protección avispa asiática 1510 a medida
traje protección avispa asiática 1510 a medida
Size guide
Buy product
From €310.14 (+ taxes)
  • Beige outer fabric composed of 65% polyester and 35% cotton and weighing 240 g/ m2 .
  • Adjustable belt with quick-release buckle closure made of nylon.
  • Certified rubberized anti-puncture gloves with Kevlar interior attached to fabric cuffs with elastic at the end.
  • Fabric with double layer and soft polyester.
  • Beige outer fabric, composed of 65% polyester and 35% cotton, and weighing 240 g/m2.
  • Soft, 100% polyester composition, with a weight of 200 g/m2.
  • Inner fabric composed of 65% polyester and 35% cotton and a weight of 240 g/m2.
  • Hood with 2x2mm Teflon-coated glass mesh strip, 180-degree vision and reduced volume.
  • Padded protection from the back of the neck to the ears.
  • Approved helmet (EN397) adjustable with rotating wheel and chin strap with polycarbonate visor (EN 1661B 3) and ventilation holes.
  • Nylon zipper with a slider and separator closing the hood.
  • Metal front zipper with double slider.
  • Full zipper cover with Velcro closure.
  • A spray holder on the back secured with two elastic bands and another on the leg also secured with two elastic bands.
  • Adjustable belt with quick-release buckle closure made of nylon.
  • Two lower front pockets with nylon zip closure.
  • Elasticated cuffs on sleeves.
  • Certified (EN388) anti-puncture rubberized gloves with Kevlar interior attached to fabric cuffs with elastic at the end.
  • Gaiters with elastic at the top and bottom and with a third elastic band to hold the sole of the foot.
  • We manufacture all the necessary sizes.

Regulations

  • CERTIFIED BY AITEX Nº 0161/4401/15 EPI TYPE DIVER’S SUIT XORSA 1510 AND ITS VARIANT 1511.
  • PATENTED MODEL.
  • CERTIFICADO UE.

VELUTINA SUIT MODEL 1512 with Kordura fabric (special for brush clearing)

CERTIFIED BY AITEX Nº21/4277/00/0161
PATENTED MODEL
traje protección avispa velutina 1512
Size guide
Buy product
From €507.12 (+ taxes)
  • 100% Kordura black outer fabric, with a weight of 290 g/ m2 .
  • Soft, 100% polyester composition, with an approximate weight of 200 g/ m2 .
  • Black inner fabric of 65% polyester / 35% cotton, with a weight of 240 g/ m2 .
  • Breathable 3D mesh back panel with double 100% polyester fabric, with a weight of 260 g/ m2 .
  • Nickel-free metal zipper with separator closing the hood with tie pull.
  • Nickel-free metal front zipper with two sliders.
  • Adjustable belt with quick-release buckle closure.
  • Approved adjustable helmet with rotating wheel and chin strap, with polycarbonate visor adapted to helmet with ventilation holes.
  • Hood with 2×2 Teflon-coated fiberglass mesh strip in black, 180-degree vision and reduced volume.
  • Certified rubberized anti-puncture gloves with Kevlar interior attached to fabric cuffs with elastic at the end.
  • Gaiters with elastic at the top and bottom and with a third elastic band to hold the sole of the foot.

Regulations

  • CERTIFIED BY AITEX Nº21/4277/00/0161.
  • PATENTED MODEL.
  • CERTIFICADO UE.

JACKET CLEARING

Size guide
Buy product
From €440.25 (+ taxes)
  • 100% Kordura black outer fabric, with a weight of 290 g/ m2 .
  • Soft fabric composed of 75/80% solid fiber – 25/20% two-component thermosetting fiber, with a weight of 200 g/ m2 .
  • Black inner fabric of 65% polyester / 35% cotton, with a weight of 240 g/ m2 .
  • Black inner fabric adjustable to the body lower area of ​​the jacket, 100% polyester, with a weight of 225 g/ m2 .
  • Breathable 3D mesh back panel with double 100% polyester fabric, with a weight of 260 g/ m2 .

Upper part (head)

  • Hood with 2×2 Teflon-coated fiberglass mesh strip in black, 180-degree vision and reduced volume, with ample space to be adapted to an approved brush-clearing helmet.

Zippers

  • Hood: 115 cm zipper with a slider and nylon separator no. 5 in black.
  • Front: metal zipper. And zipper cover with Velcro closure.

Body-adjustable pieces

  • Elasticated cuffs on sleeves.

Aesthetics

  • Mandarin collar.
  • Adrenaline pocket on the left arm.

Accessories

  • Certified rubberized anti-puncture gloves with Kevlar interior.

Regulations

  • EU CERTIFIED MODEL
cazadora desbroce velutina
cazadora desbroce velutina
Size guide
Buy product
From €440.25 (+ taxes)
  • 100% Kordura black outer fabric, with a weight of 290 g/ m2 .
  • Soft fabric composed of 75/80% solid fiber – 25/20% two-component thermosetting fiber, with a weight of 200 g/ m2 .
  • Black inner fabric of 65% polyester / 35% cotton, with a weight of 240 g/ m2 .
  • Black inner fabric adjustable to the body lower area of ​​the jacket, 100% polyester, with a weight of 225 g/ m2 .
  • Breathable 3D mesh back panel with double 100% polyester fabric, with a weight of 260 g/ m2 .

Upper part (head)

  • Hood with 2×2 Teflon-coated fiberglass mesh strip in black, 180-degree vision and reduced volume, with ample space to be adapted to an approved brush-clearing helmet.

Zippers

  • Hood: 115 cm zipper with a slider and nylon separator no. 5 in black.
  • Front: metal zipper. And zipper cover with Velcro closure.

Body-adjustable pieces

  • Elasticated cuffs on sleeves.

Aesthetics

  • Mandarin collar.
  • Adrenaline pocket on the left arm.

Accessories

  • Certified rubberized anti-puncture gloves with Kevlar interior.

Regulations

  • EU CERTIFIED MODEL

Contact us

and get your questions answered about our products
CONTACT US NOW